I wanted to print a calibration cube just to make sure I had the correct settings. Turned out great!Printed in Matterhackers Purple Build Series PLA

I have a weird work schedule right now due to the virus running rampant, and so when another university in town asked for help with facemasks for their facility, I have to set up some bulk printing.These are 60 faceshield visors printed in two print jobs. Here's hoping the post processing goes well!

Making tiny little knobs for tiny little screws.I wanted to be able to remove my M3 screws from the Pi4 enclosure without a tool. This should help!

Since my printer is pretty much occupied these days, I have been tinkering with other things. I currently have an 8gb Pi 4 running Retropie on a portable screen, all powered by an iMuto portable charger X6.I have plans to add a Roku stick and HDMI switch to this, so I will probably show more in the future.

I had a chance this week to create face mask straps for my work. I wanted to add our mascot, but also keep it functional. Since this needs to bend, I didn't have a lot of layers to work with, and had to iterate a few times before I got it right.So many times we see the final product, but rarely do we see the steps taken to get to that product. In this case, it took failing four times before I succeeded.If you have something you want to do or are doing, don't let failure keep you down. Failure is learning and growing. Failure is rarely the final destination, but rather another step in the journey.

New SNES Switch game holder is ready to go! Holds twelve games and snaps in place similar to the NES cartridge. Go grab one while you can!

I was able to print the NES cartridge is gold silk pla, and it looks gorgeous! Worthy of any Hyrulian's collection!If you want one of your own, check out my Etsy store. Link in my profile!

You asked, and I did it. I opened a store! If you want to grab one of these NES cartridges to hold your switch games, go to the link in my profile. Better hurry, the queue is filling up!

Progress has been made on the organizer! I didn't realize just how much space I would have at the bottom to work with.Also, I have been toying with the idea of opening the site up to other people who want to use their own calendars. Would you use something like this?

And now for something a little different. I have started a project that is not just 3D printing, but also wood working, programming, and a tiny bit of electronics.This is the start of a digital organizer for my family that I will hang on a wall.

3D printing isn't all glamorous and beautiful. It takes a lot of time, work, and maintenance to get good results.Right now, my Ender 3 is getting an update so I can easily handle upgrades and enable safety features that I wouldn't otherwise have.

I took a small break from printing face shields last weekend and I printed a few of these for my wife to give as gifts to her team at work. It's based on a game I used to play at my Oma and Opa's house when I was young. I hope to release the models soon.

The first of hopefully many headbands for face masks. Took about two hours to print one, so I am hoping to pump out a decent amount.

A student requested this to help in their class studies. The details in this are so good!

I made a stand for my Death Star model! I am still tweaking the dimensions, but I am very close to having it done!

Twinning octopi!

Been designing a sign holder for my wife. I like how it's turning out so far. Just need to add the sign design.

"Four hours and seven minutes ago, I brought forth on a printer this bust. Conceived by someone on Thingiverse and requested by a student to be printed by me.Now I have engaged in printing a model, testing the limitations of what this printer, or the other printer, can successfully output." So I printed a bust of Abraham Lincoln. Turned out pretty good!

This whole dice tower turned out nearly flawless! Printed with no supports over the weekend, and ready for pick-up today!

And now for something completely different. I have been building a bingo generator for the last few weeks, and I have finally reached a point where I am comfortable sharing it.Go on over to my website and check it out! Link in my profile.